Systematic Review of Quality Improvement and Efficiency in the Use of Non-Ferrous Metal Materials

Article Sidebar

PDF (Indonesian)
Published: May 31, 2025
DOI: https://doi.org/10.2025/IJIE.v1i1.03
Keywords:
Systematic Literature, Non Ferrous Metals, Production, Quality

Main Article Content

Alvi Octavianto
Universitas Pelita Bangsa
Andriyas Sugiarto
Universitas Pelita Bangsa
Syafrian Eko Nugroho
Universitas Pelita Bangsa
Siti Rahayu
Universitas Pelita Bangsa

Abstract

Along with technological advances and increasing demand for durable and environmentally friendly materials, non-ferrous metals such as aluminum and copper are increasingly receiving attention in various industrial sectors. The production process of these materials faces various challenges, especially in casting and processing. This study aims to analyze various improvement techniques used in the production process of non-ferrous materials. This research method is carried out starting from collecting articles, processing and analyzing the articles using systematic observation. The data sources used are articles in the period 2020 - 2024. The results of this study found that the year of the most research authors was 2023 and as many as 9 articles. Based on the industry, the most commonly found is the type of industry in the electronics sector with 5 articles. The contribution of this research is to provide convenience for other researchers as a reference in articles to improve the quality and efficiency of the use of Non-Ferro metal materials

Article Details

Issue
Vol. 1 No. 1 (2025): JIEI May 2025
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

References

[1] Smith, W. F., & Hashemi, J. (2019). Foundations of Materials Science and Engineering. McGraw-Hill.

[2] Jones, M., & Kaplan, R. (2020). Non-Ferrous Metals: Characteristics and Applications. CRC Press.

[3] Patel, T., Singh, R., & Verma, K. (2021). "Efficiency Improvement Techniques in Non-Ferrous Metal Production". Journal of Industrial Engineering, 55(2), 145-162.

[4] Davis, L., & Park, S. (2022). Quality Control and Automation in Metal Manufacturing. Springer.

[5] D. Chandra, D. Nataliana, and A. Sabat, “Perancangan Dan Implementasi Printed Circuit Board ( Pcb ) Ramah Lingkungan,” vol. 11, no. 1, pp. 31–35, 2022.

[6] R. K. Wardani et al., “Jurnal Mahasiswa Teknik In dustri Analisis Pengendalian Kualitas Produk Lemari Dengan Menggunakan Metode Failure Mode And Effect Analysis (FMEA) Pada Ikm Ihsan Alumunium Di Padaherang (FMEA) pada IKM Ihsan Alumunium di,” vol. 02, no. 01, pp. 35–45.

[7] M. Ulfah, D. L. Trenggonowati, R. Ekawati, F. Arina, A. Sonda, and A. Wulandari, “Penerapan Metode Six Sigma dalam Pengendalian Kualitas Produk Kabel Low Voltage Konduktor Tembaga pada PT JCC Tbk,” J. Syst. Eng. Manag., vol. 2, no. 1, p. 82, 2023, doi: 10.36055/joseam.v2i1.19398.

[8] A. Saragih, W. B. S. Harahap, and D. F. Gultom, “Analisis Peningkatan Kualitas untuk Mengurangi Cacat Produk Kabel NYA di PT XYZ Menggunakan Metode Six Sigma,” J. Talent. Conf. Ser. Energy Eng., vol. 23, no. 20, pp. 6–1, 2023, doi: 10.32734/ee.v6i1.1775.

[9] Rusmalah and I. Mashabai, “JITSA Jurnal Industri&Teknologi Samawa Volume 4 (2) Agustus 2023 Halaman 61-70 Penerapan Pengendalian Kualitas Pada Produk Jendela Alumunium Dengan Metode Six Sigma,” J. Ind. Teknol. Samawa, vol. 4, no. 2, pp. 61–70, 2023.

[10] P. Priyono and M. R. Radyanto, “Peningkatan Kualitas Perakitan Wire Harness Type Xyz Menggunakan Metode Statistic Quality Control,” J. Ind. Eng. Oper. Manag., vol. 6, no. 2, pp. 177–187, 2023, doi: 10.31602/jieom.v6i2.12121.

[11] I. S. N. M. Nugrowibowo, “Pengendalian Kualitas Produk Aluminium Alloy Wheel Dengan Metode Seven Tools dan PDCA,” J. Informasi, Sains dan Teknol., vol. 6, no. 1, pp. 104–119, 2023, doi: 10.55606/isaintek.v6i1.86.

[12] I. Mayusda, “Quality Improvement of Tin Ingot Product Using Six Sigma Method at PT Timah Tbk,” Opsi, vol. 16, no. 1, p. 121, 2023, doi: 10.31315/opsi.v16i1.7434.

[13] R. Karuna, H. J. Kristina, and I. W. Sukania, “Peningkatan Kualitas Dan Minimasi Waste Pada Produksi Kawat Tembaga Dengan Metode Lean Six Sigma,” J. Mitra Tek. Ind., vol. 2, no. 3, pp. 241–253, 2023, doi: 10.24912/jmti.v2i3.28418.

[14] H. Apriantoni, G. Marausna, and F. Setiawan, “Pengaruh Variasi Suhu Terhadap Kekuatan Mekanika Pada Alumunium 7075-T6 Dengan Metode Elektroplating,” Tek. STTKD J. Tek. Elektron. Engine, vol. 9, no. 1, pp. 28–35, 2023, doi: 10.56521/teknika.v9i1.779.

[15] T. Harianto and S. Djoko Harijanto, “Pengendalian Kualitas untuk Meminimalkan Tingkat Cacat Produk Dandang Alumunium 3KG di UD. XYZ,” Pros. Senakama, vol. 1, no. September, 2022.

[16] D. Yuswandi, D. Anindya, and R. Dwicahyani, “Pengendalian Kualitas Produk Cacat Hollow Alumunium Menggunakan Metode Six Sigma dengan Tahapan DMAIC (Studi Kasus di PT. XYZ Surabaya),” Semin. Nas. Teknol. Ind. Berkelanjutan I (SENASTITAN I), pp. 421–429, 2021.

[17] M. Widyantoro, “Analisis Penyebab Cacat Cekung Profil Aluminium Bangladesh Window Dengan Metode FMEA,” J. Mekanova Mek. Inov. dan Teknol., vol. 7, no. 1, p. 1, 2021, doi: 10.35308/jmkn.v7i1.3555.

[18] D. Meidiarti, “Pengendalian Kualitas Produk Cacat Batang Alumunium Ec Grade Menggunakan Pendekatan Failure Mode and Effect Analysis,” J. Ilm. Tek. Ind., vol. 8, no. 1, pp. 18–24, 2020, doi: 10.24912/jitiuntar.v8i1.6341.

[19] E. Maryani, H. H. Purba, and S. Sunadi, “Process Capability Improvement Through DMAIC Method for Aluminium Alloy Wheels Casting,” J. Ind. Eng. Manag. Res., vol. 1, no. 4, pp. 19–26, 2020, doi: 10.7777/jiemar.v1i2.

[20] N. Setyo and N. Hayati, “Pengendalian cacat tuang produk cor aluminium ADC 12 gravity-die-casting: Studi kasus di PT Sinar Mulia Teknalum,” J. Tek. Mesin Indones., vol. 19, no. 1, pp. 10–20, 2024, doi: 10.36289/jtmi.v19i1.607.

[21] S. Masruroh and T. Purnomo, “Analisis Kandungan Logam Berat Tembaga (Cu) pada Tumbuhan Akuatik sebagai Indikator Pencemaran di Sungai Brantas Mojokerto,” LenteraBio Berk. Ilm. Biol., vol. 13, no. 1, pp. 131–140, 2023, doi: 10.26740/lenterabio.v13n1.p131-140.

[22] A. Siregar, A. Ramadhan, and M. Mawardi, “Pengaruh pengecoran timah hitam dengan timah murni terhadap laju korosi,” J. Vor., vol. 3, no. 1, pp. 161–165, 2022, doi: 10.54123/vorteks.v3i1.151.

[23] D. S. Yansuri, S. Subianto, and M. A. Akbar, “Evaluasi Jenis Kabel Dari Tembaga Ke Alumunium Untuk Distribusi Power Supply 20 Kv Coal Conveyor,” J. Tek. Elektro, vol. 11, no. 2, pp. 9–17, 2021, doi: 10.36546/jte.v11i2.488.

[24] Mahadi S.T., M.T and Rayhan Novri, “Pengaruh Variasi Pengadukan Serbuk Aluminium (Al), Magnesium (Mg), Dan Seng (Zn) Terhadap Sifat Mekanik Logam Dengan Metode Metalurgi Serbuk,” Dinamis, vol. 8, no. 1, p. 9, 2020, doi: 10.32734/dinamis.v8i1.7236.

[25] A. Fauzi, R. Galang, H. Kurnia, D. Egga, and M. Usman, “Penggunaan Non-Metallic Material di Berbagai Industri Manufaktur Indonesia Secara Tinjauan Literatur Sistematis,” J. Kalibr., vol. 6, no. 1, pp. 13–21, 2023, doi: 10.37721/kalibrasi.v6i1.1123 1.

[26] C. R. S. Islami, H. Kurnia, D. Mawabagja, D. Dananjaya, and R. R. Subarkah, “Aplikasi Material Teknik Jenis Non Logam Diberbagai Industri Manufaktur Indonesia Secara Sistematik: Kajian Literatur,” Pros. SAINTEK Sains dan Teknol. Fak. Tek. Univ. Pelita Bangsa, vol. 2, no. 1, pp. 343–351, 2023.